ABNEN 3548 is a high-performance one component polyurethane hot melt adhesive. It is designed for adhesive application process of electronic products, with a relatively long open time. It has good initial strength after cooling and hardening at the bondin
ABNEN® 5108 is a kind of one-component wet curing reactive hot-melt adhesive with 100% solid content.
ABNEN 5018N additive two-component vulcanized silicone rubber
ABN 5308/18/28/38 are the addition type two-component silicone gel. It cures at room temperature and can be accelerated by heating
ABNEN 54 series thermally conductive silicone grease is a kind of paste with special silicone oil as base oil, new metal oxide as seasoning, with a variety of functional additives, processed by a specific process. It is almost never cured, and used as a r
Abnen 5098 is an addition type two-component silicone gel. It cures at room temperature and can be accelerated by heating. After curing, it forms a very soft elastomer.
Abnen 5098P is an addition reaction type bi-component silicone adhesive. It can be cured at room temperature, and heating may accelerate the curing process. It forms a very soft elastomer after curing.
Abnen 5607 and 5617 are two types of condensed one-component RTV silicone rubbers composed of silicone polymer, functional fillers, additives, crosslinker, etc.
ABNEN 5508 additive two-component silicone rubber